Home > News > Content
What Are The Properties Of Ferrite Segment Magnet?
Jun 30, 2017

What are the properties of Ferrite Segment Magnet?
Most of the enterprise factory with the magnet or NdFeB mostly ferrite with less, but can not be generalized, specifically to see the product application, today Carrick magnet manufacturers Xiaobian to give you nagging nagging ferrite Body magnet.
Ferrite Segment Magnet: Its main raw materials include BaFe12O19 and SrFe12O19. Made of ceramic technology, the texture is relatively hard, is a brittle material, because the Ferrite Segment Magnet have good temperature resistance, low price, moderate performance, has become the most widely used permanent magnet.

      Ferrite Segment Magnet are sintered permanent magnetic materials, composed of barium and strontium iron body, this kind of magnetic material in addition to a strong anti-demagnetization performance, there are advantages of low cost. The Ferrite Segment Magnet are rigid and brittle and require special machining processes. The opposite magnets are magnetized in the direction of their direction as they are oriented in the direction of their manufacturing, and their homogeneous magnets can be magnetized in any direction without being oriented, although a slightly stronger magnetic induction is found on the face where the compression surface is often the smallest. The magnetic energy product ranges from 1.1MGOe to 4.0MGOe. Due to the low cost, Ferrite Segment Magnet have a wide range of applications, from motors, speakers to toys, handicrafts, and thus is currently the most widely used permanent magnet materials.

      Ferrite sub - ferrite, soft ferrite, microwave ferrite. Permanent ferrite has barium ferrite, strontium ferrite. Soft ferrite is divided into manganese zinc ferrite, nickel zinc ferrite, magnesium zinc ferrite, microwave ferrite yttrium ferrite and so on. There are hexagonal ferrite and so on.

      What is the effect of ferrite?

      1, magnetic shielding effect, or absorb electromagnetic waves.

      2, ferrite is not the highest high temperature to 450 degrees? General ferrite can only reach 200 degrees.

      3, there is adsorption, but the adsorption force is very small, a gang is a conductive effect, in the motor with more.

      What is the density of ferrite?

      Sintered ferrite: density of about 4.9 g / cm3.

      Injection ferrite, the density of about 3.8 g / cm3.

      What is the most used Ferrite Segment Magnet?

      Ferrite Segment Magnet are the most used is undoubtedly a variety of motors. Motorcycles and motor start motor, car window sunroof open motor. Curtains automatic devices, toys, motor and so on.

      What is the cost of ferrite molds?

      Our company currently has thousands of sets of round, square and tile-shaped mold. Can help customers save a lot of open mold costs, usually open the cost of 1-3 million or so.

Copyright © Wuxi Jinwei Permanent Magnet Co.,Ltd All rights reserved.Tel: +86-510-83781871